Nissan corrosion Problems

  1. Altima Rusted Floorboards

    Altima owners have a dangerous problem lurking beneath their feet. The 3rd generation (2002-06) sedan has floorboards that seem particularly susceptible to corrosion. The result? Widespread rust that’s often concealed by the interior carpet…

    Continue reading article "Altima Rusted Floorboards" I see London, I see ... OMG is that the road?

Related News

There's a lot of news out there, but not all of it matters. We try to boil down it to the most important bits about things that actually help you with your car problem. Interested in getting these stories in an email? Signup for free email alerts over at CarComplaints.com.

  1. There is a serious danger lurking beneath the feet of 3rd-generation Altima owners.

    And since Nissan refuses to do anything about it, the issue has made its way to court. Plaintiff Marie DeMaria filed the proposed class-action lawsuit that alleges rust and corrosion can cause the floorboards to rust so severely the occupants can see the road. Additionally, the holes are deceptively dangerous because the interior carpet can hide the rust and corrosion from Altima owners.

    The problem is often concealed by the interior carpet and isn’t noticed until it’s too late. The rust often gets so bad that these vehicles can no longer pass state inspections without expensive repairs.

    keep reading article "Nissan Sued for Altima Floorboards That Rust So Badly Owners Can Poke Holes Through The Floor With Their Toes"
  2. Nissan is recalling about 501,000 trucks in the United States because corrosion in the lower steering column joint and shaft can cause a sudden steering failure.

    The lower steering column joint on the affected Frontier and Xterra vehicles can develop corrosion that limits the movement of the joint, although they're saying that's rare.

    If the vehicle continues to be driven in this condition it may, in an extreme case, lead to cracking of the steering shaft.

    The affected vehicles include any of the following manufactured between August 2003 and June 2006:

    • 2002–2004 Nissan Frontier vehicles manufactured from July 9, 2001 to October 20, 2004 in Smyrna, Tenn., for the North American markets
    • 2002–2004 Nissan Xterras manufactured from July 9, 2001 to January 6, 2005 in Smyrna, Tenn., for the North American markets

    Additionally:

    • Nissan Frontier vehicles manufactured from November 30, 2001 to June 26, 2008 in Curitiba, Brazil for South and Central American markets
    • Nissan Xterra vehicles manufactured from February 17, 2003 to June 13, 2008 in Curitiba, Brazil for South and Central American markets
    • Nissan Sentra vehicles manufactured from May 15, 2010 to July 8, 2010 in Aguascalientes, Mexico for global markets

    Nissan plans to begin owner notification in early December once replacement parts are available. Owners will be asked to bring their vehicles to the dealer to have the new parts installed free of charge.

    keep reading article "Steering Shaft Failure Recall"